CONCORD ULTIMAX User Manual

122. Front-facing installation (from 9 to 18 kg)0244-01Tighten the upper belt (1) slightlyand close the red belt clip (2).Then tighten the belt once a

2. Front-facing installation (from 9 to 18 kg)0245-01Belt positioning when the baseunit is installed correctly.The buckle for the vehicle safetybelt m

2. Front-facing installation (from 9 to 18 kg)0246-00Always check that when the seatshell is inserted a green dot isvisible on both sides throughthe o

3. Securing the child0247-00Open the belt buckle and openthe child seat belts outwards tolie on the armrests. Then put thechild into the seat shell so

3. Securing the child0248-02Tension the belt system by pullingthe belt of the central adjusteruntil your child is securelystrapped in. Please check th

4. Adjusting the seat to the child’s size / adjusting the head support and harness0249-03Grasp the head support at thetop and pull it forwards. You ca

4. Adjusting the seat to the child’s size / adjusting the head support and harness0250-02On the rear of the seat shell,separate the two belts from the

4. Adjusting the seat to the child’s size / adjusting the head support and harness0251-01Then pull the two belts out to thefront through the backrest

4. Adjusting the seat to the child’s size / adjusting the harness / shortening the belts0252-020143-040124-03click4.8When does the belt systemneed to

4. Adjusting the seat to the child’s size / shortening the belts0253-01Remove the seat shell from thebase unit and lay the shell upsidedown on a clean

Using the ULTIMAX child car seat0236-02To safeguard your child you haveopted for our CONCORDULTIMAX seat. This product ismanufactured under strict qua

click4. Adjusting the head support / adjusting the seat to the child’s size0254-01When does the shortened beltsystem need to be returned toits lengthe

15. Releasing the belt tensioner to remove the seat0255-01Releasing the belt tensioner on thebase unit when installed facing thefront:Pull the grey le

0256-016. Removing the cover / removing the pelvic insertKeep pressing the grey lever onthe belt tensioner down and pullthe car seat belt in the direc

6. Removing the cover / removing the pelvic insert0257-01Lay the seat shell upside downon a clean surface. Lever out themetal clasps secured on thesid

6. Removing the cover / removing the pelvic insert0258-00If the child’s body weight exceeds8 kg, the factory-fitted pelvicinsert should be removed. Th

0259-0030°7. Care instructionsRemoving the seat covers towash:The cover is composed of twoparts which are secured to theseat by means of Velcro tape,b

0260-01You should also tell yourpassenger how to remove thechild in the event of an accidentor danger.The belts may only be routed viathe points of co

0261-01The warranty shall commencefrom the time at which the seatis purchased. The warrantyperiod shall correspond to thelegal warranty period for the

0145-06Um die Funktionsfähigkeit und Sicherheit Ihres Kinderauto-sitzes auch nach einem Austausch von Ersatz- und Zube-hörteilen zu gewährleisten, bit

211. Rear-facing installation (from birth to 13 kg)0237-02Important!Do not use on seatswith airbags.Extreme danger!Turn the rotary handle at the front

click1. Rear-facing installation (from birth to 13 kg)0238-01Pass the car seat belt over thetop of the base unit and securethe belt in the buckle.Posi

1. Rear-facing installation (from birth to 13 kg)0239-01Wrong belt positioning!Belt positioning when the base unitis installed correctly.1.60119-061.7

1. Rear-facing installation (from birth to 13 kg)0240-02Hold the seat shell as illustratedand position it on the base unit.Press the seat shell downwa

212. Front-facing installation (from 9 to 18 kg)0241-01Important!Front-facing installation is onlysuitable from a body weight of9 kg and without the p

click2. Front-facing installation (from 9 to 18 kg)0242-01Pass the car seat belt over thetop of the base unit and securethe belt in the buckle.Insert

2. Front-facing installation (from 9 to 18 kg)0243-02Turn the open side of the ratchetshaft upwards.Position the upper belt (diagonalbelt) in the open